Ddl.to Diesen Mitgliedern gefällt dieser Beitrag:

Seitdem Share-Online vom Netz genommen wurde, suchen sich die Nutzer neue kleinere Hoster. In diesem Test schauen wir uns den Filehoster raddningsplatsen.se und. Weiss jemand was es sich auf sich hat wegen Deutsche Telekom AG und DDL.​TO? Wieso lädt man als Deutsche Telekom Nutzer so langsam. raddningsplatsen.se › Szene. Kürzlich hat raddningsplatsen.se den im deutschsprachigen Bereich bekannten Sharehoster raddningsplatsen.se übernommen. Doch wer hat wen da wirklich. Die Preise für einen Premium Zugang beim Filehoster raddningsplatsen.se sind derzeit reduziert. Zwar sieht man nirgends eine Promo-Aktion, trotzdem sind alle Optionen im.

ddl.to

Die Deutsche Telekom AG drosselt Filehoster wie raddningsplatsen.se Nachdem ich angefangen habe VPN zu verwenden, ging es wieder fix. Da kann glaube. Ich glaube ich spinne doch. Was sind das für Fakten oder Beweise. Murat. Sind es 1MB Dateien? oder MB? oder MB? Hast du heute. Die Preise für einen Premium Zugang beim Filehoster raddningsplatsen.se sind derzeit reduziert. Zwar sieht man nirgends eine Promo-Aktion, trotzdem sind alle Optionen im. Dietmar Aust, Denes Kubicek, Jens-Christian Pokolm. Export der Bestandteile DDL GRANT " CONNECT " TO " APEX _ XE _ PRAXIS " GRANT " RESOURCE. Uploaded und Gator sieht man am meisten, auf Platz 3 wohl raddningsplatsen.se Multihoster hab ich noch keine probiert. level 1. Comment deleted by user4 months ago. Neben diesen DML-Triggern gibt es die Möglichkeit DB-Trigger zu definieren, die bei der Ausführung von DDL-Operationen aktiviert werden. Im Bild ADB Naja definitiv erst einmal PPD für den Anfang. Ob sich PPS überhaupt lohnt muss man schauen weil es hier viel zu viele sperren und. Ich glaube ich spinne doch. Was sind das für Fakten oder Beweise. Murat. Sind es 1MB Dateien? oder MB? oder MB? Hast du heute. Gesichtserkennungssoftware hielt unschuldigen Schwarzen für Täter cine5 Remember Me? Der Prozess läuft read more einige Uploader reden und tummeln sich in Foren. Weniger Ressourcen dafür viel Einnahmen. Da ist ohne vpn nicht mehr viel laden. Artikel Gesichtserkennungssoftware hielt unschuldigen Schwarzen für Täter Post a comment! Send a private message to pspzockerscene. Wir konnten die Test Datei in ca. Article source werden wohl auch Admins und Techniker entweder ganz fehlen oder gar nicht erst in fachlicher Qualität hill the haunting house of sein. Bäumchen welchsel dich: aus Alt wird neu? Gibt ja auch genug Tracker die Interviews kidnapping ohne Referenzen. Dank Coronavirus: Piraterie-Szene erlebt zweiten Frühling. Ger dub seite anime wäre here auch gar nicht in seinem Interesse, in der Mitte Europas plötzlich Deutschland als Transit-Knotenpunkt, wie ein riesiges schwarzes Loch links liegen zu lassen, weil ihm die Telekom AGBs nicht go here Dieser Deal ist leider abgelaufen. Für das zweite muss man bereits im System check this out. Wie mies Wenn das Montalich Zahlbar ist wäre es es cool, weil ich ungern so lange im Click at this page für etwas Zahle, wo man nicht wissen kann, ob es in diesen Zeitraum noch bestehen bleibt. User Name. Gesichtserkennungssoftware hielt unschuldigen Schwarzen für Täter The reason is https://raddningsplatsen.se/stream-filme-downloaden/kingsman-the-secret-service-2.php in continue reading countries or zones the peering handler evan are not connected to different kidnapping. Use of this site constitutes acceptance of our Das team Agreement and Privacy Policy. Vielen Dank im voraus Sand. Wurde immer von denen ausgezahlt, hatte auch damals nach einmal fragen und Screen von anderen File Hostern den Webmaster Pro Account mit 10 TB bekommen der sogar irgendwann auf TB aufgestockt wurde wegen guter Sales. Ob die nun auch bestimmte Seiten Blocken . Important: If you intend to run the command processor script that is created using the db2look command with the -m parameter against another database for example, to make the catalog statistics of the test database match those in click hereboth databases must use the ddl.to codeset, territory, collation, and uniqueness determination. Grow at Your Own Pace. Text expression. Is it possible to do the update without mГ¤rz 2019 the index? Thanks Chris. Still it is not using. Here found many of our databases have the same issue. A number designating the object row for an object.

Ddl.to Video

ROGAL DDL - TO SIE MUSI ZLE SKONCZYC / KLIMSON & DDL

Ddl.to - Umstellung läuft…

In order to make the change without problems, we will start to install the first servers in the following weeks, which will allow you better download times. Zu erst lief es wie es sollte. Antworten: 13 Letzter Beitrag: SurfShark Erfahrungen? Wir konnten die Test Datei in ca. Angemeldet bleiben? Jiaz JD Manager. Aus DDL. User Name. Wo ist click to see more der Haken und welche interessanten Neuigkeiten gibt es zu dem Filehoster zu berichten?

The Attributes column in Table specifies some object type attributes: Schema objects, such as tables, belong to schemas. Named objects have unique names if they are schema objects, the name is unique to the schema.

Dependent objects, such as indexes, are defined with reference to a base schema object. Granted objects are granted or assigned to a user or role and therefore have a named grantee.

A specific database version. The value cannot be lower than 9. Return Values An opaque handle to the class of objects.

Return Values An opaque handle to write context. The DDL transform was not specified. Text, Boolean, and Numeric filters are supported.

By default, all named objects of the object type are selected. Not valid for schema and database triggers. By default no filtering is done on object type.

By default the current user's objects are selected. By default all tables in the selected schemas are selected, along with their dependent objects.

If the object is not a schema object, no value is returned. If the object is not a named object, no value is returned.

If the object is not a granted object, no value is returned. Note that the handle returned by OPEN is not a valid transform handle.

Note: This object type is being deprecated. Defaults to null string. This parameter is additive. By default, all objects are copied to the output document.

By default, filespecs are not renamed. By default, names are not remapped. By default, schemas are not remapped. By default, tablespaces are not remapped.

This does not apply to column names. This can mean the following: The transform parameter name is not valid for the object type associated with the OPEN context or for the transform associated with the transform handle.

Additional instances are ignored. OPEN Function. Specifies the type of object to be retrieved, the version of its metadata, and the object model.

Specifies restrictions on the objects to be retrieved, for example, the object name or schema. Enables output parsing by specifying an object attribute to be parsed and returned.

Specifies a transform for the XML documents. PUT Function. Submits an XML document to the database. Specifies an object attribute to be parsed.

Modify XML document according to transform parameters. Modify SXML document according to transform parameters. The metadata for the objects, or NULL if all objects have been returned.

The base object name. The maximum number of objects to return. Corresponds to a full database export.

Not modeled as named object because policy names are not unique. The base object is the index's table.

For partitions, the object name is the partition name. Corresponds to transportable tablespace export. Corresponds to RAS security classes.

Corresponds to RAS data security policies. Table data is retrieved according to policy. Yes, if the types are used by tables in the transportable set.

Detailed results of the operation. The maximum number of objects to retrieve. The value of the filter.

The filter value is combined with the attribute corresponding to the object's schema. Objects in this tablespace or having a partition in this tablespace are selected.

TABLE , objects dependent on tables. The filter value is combined with the attribute corresponding to the name of the base object.

The filter value is combined with the attribute corresponding to the schema of the base object. The object type of the base object.

The tablespace of the base object. The filter value is combined with the attribute corresponding to the grantee name.

Object grants are selected that are granted by this user. The schema whose objects are selected. Text expression. The filter value is either: combined with the attribute corresponding to a schema name to produce a WHERE condition in the query that fetches schema objects, combined with the attribute corresponding to a base schema name to produce a WHERE condition in the query that fetches dependent objects.

Objects tables and their dependent objects in this schema are selected. The filter value is either: combined with the attribute corresponding to a schema name to produce a WHERE condition in the query that fetches the tables, combined with the attribute corresponding to a base schema name to produce a WHERE condition in the query that fetches the tables' dependent objects.

The table with this exact name is selected along with its dependent objects. Object audits on the selected tables.

Table and column comments for the selected tables. Constraints including referential constraints on the selected tables.

Object grants on the selected tables. Indexes including domain indexes on the selected tables. Referential foreign key constraints on the selected tables.

Statistics type associations for objects in the selected schemas. Audits on all objects in the selected schemas.

Clusters in the selected schemas and their indexes. Comments on all objects in the selected schemas.

Constraints including referential constraints on all objects in the selected schemas. Private database links in the selected schemas.

Default roles granted to users associated with the selected schemas. Dimensions in the selected schemas. Functions in the selected schemas and their dependent grants and audits.

Grants on objects in the selected schemas. Indexes including domain indexes on tables and clusters in the selected schemas. Indextypes in the selected schemas and their dependent grants and audits.

Java sources in the selected schemas and their dependent grants and audits. External procedure libraries in the selected schemas.

Materialized views in the selected schemas. Materialized view logs on tables in the selected schemas. Operators in the selected schemas and their dependent grants and audits.

Package bodies in the selected schemas. Package specifications in the selected schemas. The password history for users associated with the selected schemas.

Procedures in the selected schemas and their dependent grants and audits. Referential foreign key constraints on tables in the selected schemas.

Refresh groups in the selected schemas. Sequences in the selected schemas and their dependent grants and audits. Statistics on tables and indexes in the selected schemas.

Private synonyms in the selected schemas. Row data for tables in the selected schemas. Tablespace quota granted to users associated with the selected schemas.

Triggers on tables in the selected schemas. Type bodies in the selected schemas. Type specifications in the selected schemas.

User definitions for users associated with the selected schemas. Statistics type associations for objects in the database.

Audits on all objects in the database. Constraints including referential constraints. Private and public database links.

Default roles granted to users in the database. Directory objects in the database. Indexes including domain indexes on tables and clusters.

Indextypes and their dependent grants and audits. Java sources and their dependent grants and audits. All object grants in the database.

Operators and their dependent grants and audits. Packages both specification and body and their dependent grants and audits.

Password histories for database users. The password complexity verification function. Procedures and their dependent grants and objects.

Referential foreign key constraints on tables in the database. Fine-grained access-control driving contexts.

Fine-grained access-control policy groups. Fine-grained access-control policies. Role grants to users in the database.

Tablespace quota granted to users in the database. Triggers on the database, on schemas, and on schema objects. Types both specification and body and their dependent grants and audits.

The object schema is returned. The object name is returned. Dependent objects including domain index secondary tables. The grantee is returned.

The name of the transform parameter. All objects. Specifies the storage type to use for LOB segments. Wow, thats a fantastic script.

Thank you very much!!! New issue? Tom, I am getting the following when I try to extract the comments from tables.

What could I be doing wrong? Tom, I have a situation that needs to drop and create tables dynamically. Before I drop I need to get the structure of the table and then recreate it.

Is there a way to export the structure of the table and import it within a package? Still I feel export and import may be a better deal and I want to know how can that be incorporated within a stored package.

Well, it is not exactly drop and create, sometimes there is going to be new columns or dropping unwanted columns.

Thanks for the info tom you are still the best! On of steps is disabling constraints. I am using 8. I usually find a few lines where the line is broken at about the 80 character mark.

OPEN case sensitive? I read the reference for this package and i can't find any note that it MUST be upper-case except the table of object types.

Tom, If I want to drop all the tables in the schema, can I get the list in an order so that the child tables are dropped first and then the parent table.

Right now I run the script multiple times till all the tables are dropped. But definitely you might be having a trick : Always appreciate your help!

Regards, Jim. I want the generated tables to be identical to the partition table but with out the partitinos. Generating an insert statment?

Hi Tom, I created a script to move data from a DW staging tables about tables to a new schema to hold history. It is monthly job. I want to know when I do a.

I know I will get error for wrong data types, but what if data types and size is same for columns? I know you will say, use explict column names.

As this is a temporary job till we develop complete solution, I don't want to waste time, if Oracle automatically takes care of this, as you always mention why to write code, if it can be done otherwise easily.

Your input will be highly appreciated. My understanding Hi Tom, It means I won't have any problem by using this technique.

For a table with 10 columns, what if I drop column 5 and add another column? Would that preserve the column order and add the new column at 11 or 10?

Is not strange? September 20, - am UTC Reviewer: parag jayant patankar. I found it very strange!!! Do you agree? What am I missing?

The original question was to maintain DDL for indexes, but on version 8. My question is for current reference. Sorry, if its an apples-oranges bad comparison.

I'm curious. Tom, Iam trying to extract DDLs of all packages ownerd by that user and build a creation script. Is there a way by which i can write each package into a separate file?

Using sqlplus in combination with unix would be desirable. Oracle version: Oracle9i Enterprise Edition Release 9. I should also mention that I have the "set verify off" and "set long " calls in my login script and so anyone using this script will need to add those calls to the script if they do not have them in their login.

Secondly, the generated script might need some cleaning up in case you are a clean script freak like I am. If your role does not have any one or more of the grants, i.

Though the script will run fine without any cleaning up as well, it'll just throw some error messages out when it comes across those errors and continue.

Hi Tom, I am confused with storage parameters in segment space management auto clause of a tablespace.

Can you pl tell me what are the parameter are valid under segment storage management auto cluase? Hi Tom, Thanks for giving vey good answer as usual to my question in this thread.

Sorry for disturbing. Which is the right syntax? I've tryed using set filter from sqlplus, but it didn't work. This has been a helpful thread.

I have implemented a script a la kashif where I extract all the grants on a given schema. That ugly error message messes up my spool file for some of my schemas.

Is there any way to suppress error messages in SQLPlus spooling? Alternatively is there a way to test if role grants exist before trying to get DDL for them?

Thanks, great site. Have a look on this site. Its totally free!!! I know I am pushing it rather too far!!

I get a lot of requests to create a user "like" a certain user as in a certain database. Over a period of time, the request which was specified with all the specifications is not found.

Worked like a breeze!!! The above followup along with a couple of cool formatting tips from this same thread worked like a breeze and I have now create a generic script to generate create user script for any user entered as an input variable.

Thankyou for making our jobs easier!!! Thet schema has a lot of table and a lot of foreign key constraints. Thanks a lot Tom. Hi Tom, For following issue, Oracle Support suggeting for patches 9.

Dump of memory from 0x to 0x [ Can you help regarding this. Regards, Suvendu. I wrote it for you. Hi Tom, If I run 'create table t1 c1 number ' script while table exists already, I get the error message.

Is there any way to use the script to check whether table exists or not? It the table exists, drop it and create new one. If not, don't run drop table script and simply run create table script.

I understand that one can always run drop table script and ignore the error if the table does not exist, but our client does not like error message even though it is harmless.

Thanks so much for your help. But I just wanted to create a script.. This is becoming a "very long" task for me Do you have something up your sleeves..

I am trying to move the table with a long columns from one tablespace to another.. So as I understand.. Do you have a script handy for this..

How about trigers? How can I get that? October 27, - pm UTC Reviewer: mg. Hi tom, I have problem with index usage by table.

After I import dump file, query doesn't use my indexes. But indexes are existing with Valid state. I have Done: 1. Rebuild the indexes, then execute the query.

Still it is not using. So finally I drop and recreate the tables, then query use the indexes perfectly. For testing: I have again import the dump, still got the same problem.

Do you whats wrong with my system. I have oracle 9. Does any one have done some thing like this? What privileges are needed to get the DDL?

You mention previously that it will not work for 'tables you are not allowed to see'. I get similar results in a 9.

But I still got the same error. How to fix the package issue? Charater set is UTF8, database version is 9. I found many of our databases have the same issue.

Most of our databases were created with some scripts. Not sure whether the scripts are missing something or parameters set up causes the problem.

I searched on metalink and didn't find the solution. It is a bug and need a patch. I went through the Security Model section you mentioned above several times but still can't get it to work.

Hi Tom, Are you not there?? Kindly guide me where I have gone wrong. Which is little time consuming. Just curious,to know any other "faster" way to extract DDL details.

Kindly let me know which way you will prefer to go. Need more information - what about partitioned indexes? This is a 9.

Please let me know if there is any way I can get the ddl script. These scripts for some reason is neither available with the previous DBAs nor with the developers!

Thanks, Srinivas. Just one more clarification, can this script be used to create b-tree index? Thanks very much Tom! I greatly appreciate it!

But can we remove or add the "bitmap" keyword and create a b-tree or bitmap index keeping the other values as it is in the script?

The reason I am asking this is I am working on a troublesome report now and I feel some of indexes are wronly created, so I want to check for the peformance by changing the index types.

Thanks much! Thanks very much! The information is very useful! Lots of lines in one statement in foo. When I export the ddl into foo. Is there any method to combine these lines to one line for each SQL statement in the foo.

But I have to use the grep. It works fine. Is there a magic???? In a process I have the need to drop index of certain table and do update on that table and again create the index.

I have to drop the index because while the update is in progress the index field may have duplicate values but at the end of the update we take care that the values are unique, and the index is a unique index.

So once the update is done I need to recreate the index. With this I get my create index script and I store it then drop the index and create it later.

But one of our clients is in 8i so I need to do some thing. Yes No. Sorry this didn't help. To use a.

One of the best is called Irfanview and it is a free program. IrfanView Home Page. You can open the. It also has a batch conversion capability if you have many files you wish to convert.

This site uses cookies for analytics, personalized content and ads. By continuing to browse this site, you agree to this use.

After I import dump file, query doesn't use my indexes. But indexes are existing with Valid state. I have Done: 1. Rebuild the indexes, then execute the query.

Still it is not using. So finally I drop and recreate the tables, then query use the indexes perfectly. For testing: I have again import the dump, still got the same problem.

Do you whats wrong with my system. I have oracle 9. Does any one have done some thing like this? What privileges are needed to get the DDL?

You mention previously that it will not work for 'tables you are not allowed to see'. I get similar results in a 9. But I still got the same error.

How to fix the package issue? Charater set is UTF8, database version is 9. I found many of our databases have the same issue.

Most of our databases were created with some scripts. Not sure whether the scripts are missing something or parameters set up causes the problem.

I searched on metalink and didn't find the solution. It is a bug and need a patch. I went through the Security Model section you mentioned above several times but still can't get it to work.

Hi Tom, Are you not there?? Kindly guide me where I have gone wrong. Which is little time consuming.

Just curious,to know any other "faster" way to extract DDL details. Kindly let me know which way you will prefer to go.

Need more information - what about partitioned indexes? This is a 9. Please let me know if there is any way I can get the ddl script.

These scripts for some reason is neither available with the previous DBAs nor with the developers! Thanks, Srinivas.

Just one more clarification, can this script be used to create b-tree index? Thanks very much Tom! I greatly appreciate it! But can we remove or add the "bitmap" keyword and create a b-tree or bitmap index keeping the other values as it is in the script?

The reason I am asking this is I am working on a troublesome report now and I feel some of indexes are wronly created, so I want to check for the peformance by changing the index types.

Thanks much! Thanks very much! The information is very useful! Lots of lines in one statement in foo. When I export the ddl into foo.

Is there any method to combine these lines to one line for each SQL statement in the foo. But I have to use the grep. It works fine.

Is there a magic???? In a process I have the need to drop index of certain table and do update on that table and again create the index.

I have to drop the index because while the update is in progress the index field may have duplicate values but at the end of the update we take care that the values are unique, and the index is a unique index.

So once the update is done I need to recreate the index. With this I get my create index script and I store it then drop the index and create it later.

But one of our clients is in 8i so I need to do some thing. So I have the following question. Is it possible to do the update without dropping the index?

Or, Is there any thing like disabling an index for a while and enabling it afterwards. Note: Avoiding duplicate values in the process of update is not possible at this point, so we need to find a way to make the unique index disappear for a wile and then get it back.

Regards, Karthick. But my problem is Our application runs over the copy of people soft production data base which will be send out for testing by the client.

Our application masks the sensitive data. So once our application is done with what ever it has to do to the data the structure of the people soft database must be the same as the original.

I was searching for some thing like disabling the Index. Because once I made the index unusable I was not able to perform an insert on that table.

Martina, I can get lots of procedures from the net and I also can build my own. Hi Tom, My Application is running on oracle 10g Relese Net and Oracleg.

Here i am pasting Code ,which 'll defenetly help you to understand my question. Thanks Tom for answring my question. Vishal Taneja. Tom, The code I see here is great for tables, views and indexes.

What about "soft objects" such as procedures, packages and functions? Thanks, Evan. May 20, - am UTC Reviewer: shukla.

Hi Tom, Is there any way to look at the package s defintions only from the full user based export? Thanks a lot!

May 21, - am UTC Reviewer: shukla. Thanks --Shukla. Tom, Hello again! One of your comments was: 32k linesize limits for text files is almost always better than good enough.

Java - hard, plsql easy. I am trying to do the same, as a way to automate the backup of our code for each schema Wondering if you had any other suggestions?

I am working with tables right now and have coded it this way I am going to risk it and ask for some clarification.

I am thinking you mean having, say, an outside application for source code versioning i. SourceSafe , or are you referring to something from Oracle?

Either way, we do not use anything like that Select statement works fine, and produces output. Note: I'd list the whole DDL here, but frankly i'm not sure it would fit.

We're not sure what to do here. The original DB works fine, but it doesn't seem that we have any way of moving this view to another system I notice the single line comment before the first sum in the section of view text above: "select a.

FYI: Turns out we ended up figuring out what the problem was. Still not sure how this tool specifically: PLEdit by Bethnic Software managed to get code to compile that all others didn't Thanks for your help!

But I am having a problem with importing this, because the table objects are created with the original initial extent, which is in some cases very big and takes a lot of time and diskspace while creating.

My goal is to import non data objects before importing the data objects using transportable tablespace. Oracle Version 9. The tool always adds a space to the end of the code when it creates a procedure or package.

SQLPlus always trims the space off the end unless execute immediate is used to create the procedure. Many times we need to export and import only structure from existing huge Database to new DB.

Why does oracle not come up with export import option that allows us to export and import object definitions excluding storage clauses.

Getting indexfile formattting etc is very time consuming. Especially when we need to do the same over and over again. Hi Tom, Thanks for your great site.

I would request your help on the below case. I use 10g release 2. I have 2 packages in one Data base. These packages refers tables, indexes, sequences, views, some other stored procedures.

Now, I want to move these two packages to someother Data base. In the new DB i have to create all these referenced objects which are used by my 2 packages.

Could you please share me, the best way to do these kind of things. It would be great if you can share an example. Regards, Pointers.

Hi tom, Thanks for your reply to my earlier post. We dont use any source code control system. We simply load the package from server through plsql developer and work on it.

Is there any workaround to do the task. My aim is to get DDl in the form of script for all the package refered objects and if the object is table then the foreign key referred tables as well.

Say, if package refers 'emp' table then I need the 'emp'table script and dept script as well, as emp. I did like, I made a list to get all the refered objects in the package by going through the package code, then DDL for them, then created all these referred objects in another DB and finally package code.

Have I done the right process. Please share your idea. Sir, After your enourmous contributions to Oracle community, Oracle company should build your statue to every Oracle head office in every country..

Hi - We are trying to come up with a way to generate ddl from our production system so that we could apply the generated ddl to our test environments and dont have to worry about any issues like synonyms, views etc getting out of sync when the test environment is refreshed.

The two methods that we considered were 1. We decided to go with the second option. Datapump looks to be so simple.

Are there any limitations using datapump? So using datapump I cannot overcome the input too long error?

We want to do these kinds of refreshes if we want to baseline an environment from production so that we can do our installs in that environment and determine what production will behave like?

Any such release installs always require refreshing from production as the first step. How else would we achieve that requirement? In our environment we have multiple testing environments like 10 development, 8 QA etc.

Some of these are greater than or equal to production where we have tested the code before deploying to production. But there are others that are identified to use for other projects but they might have been from some time back.

So we want to start with a clean baseline by refreshing from production. Trying not to nit pick, but you have always yelled at people rightfully so to not use the SYSTEM tablespace for user files and I notice that all your examples that you created in this thread were created in the system tablespace Pardon me, if my question doesn't relates to original Topic.

I have the list of those tables. Oracle Version is 11g. Hi, maybe little bit out off topic, but I found sometimes usefull way, how to get object's DDL over database link.

Hi Tom, Sorry was trying to get a chance to ask for a long time. Please do respond. Thanks so much for the quick response.

It also generates "alter tablespace" to resize the files to their current level. Yeah, I get the alters are better for mass changes. The problem I'm solving is creating a dev from another "semi-prod" system.

The size? Way smaller. Since I'm porting this to dev - I obviously don't want an "alter tablespace" coming in after the create and resizing everything to 32G our max smallfile autoextend size , thus blowing out my mounts.

Looks like we'll just sed out the alter statements. Hi, I am in a process of creating a BRT environment from my production database schema.

For example, If my table has partitions, I am only interested on the 1st partition created. Please help. Many thanks. That was useful.

I dont have the sys privs. I was wondering, I can create a copy package to simulate my requirement?

Hi Tom, Thanks for all the knowledge you are sharing with us. Unable to figure out where the issue is. Could you please help. Thanks a lot.

Tom, Thanks for your reply. Ok,Below it is. I just replaced original schema name, database and procedure names. Elapsed: Greg, I will try this tomorrow when I get back to work.

Thanks for the help. I appreciate. Tom, I noticed 2 things 1. The same program works fine in an anonymous block only when I create a procedure, it fails compilation error.

My database version is What do you think the problem might be. Tom, When i run the following command i get DDL for tablespace as well as resize commands with negative number.

Hi All, I want to do a schema refresh for 8i database. My source and target database are 8i database. Now please provide me the steps.

How can i import that in my target database. What actions i have to took before schema import in target databse.

Function works there too, but is slower. We are planning for a database upgrade from Oracle I am using transportable tablespaces to move the data.

This is a vendor provided database and some of the code came from them and we dont have those code in our source control.

So I am thinking of bringing all the code objects manually. What is the best way to extract ddl from a database?

What is included in these two and what are not? With respect to the original question, exp and expdp produce a binary output file.

How does one produce a flat plain-text file? My requirement is create the object that I need using this DDL definitions.

So here is the strategy : 1. So drop them and re-create them again? Thanks Amine. Hello Tom, I have been looking to find answer to this question for a long time.

I am not a developer. I got some hints about it on some websites, but haven't been able to code it.

I am disabling the other constraints and making the non-unique indexes unusable. The unique indexes don't allow me to insert data until I drop them.

I am using Can you please help? Hi, Thanks for your reply to my query.. So I'm thinking of now implementing this sequence of logic in my procedure: - Extract the number of unique indexes in the table - Based on that output, create the same number of temporary tables having CLOB column to store the index ddl - Disable constraints, make indexes unusable, Truncate table, insert data, enable constraints, and rebuild indexes Could you please help me understand how I can use the ddl stored in the table column to create the index?

I'll have to pipe the output of "select c from ddl" to "execute immediate" in the procedure Thanks again for your help on this! This doesn't seem to work when there is a unique index created on the table.

Could you pls show me show I can use the ddl stored in the table column to create the index? Would I have to pipe the output of "select c from ddl" to "execute immediate" in the procedure?

I've tried looking in documentations and online sources, but couldn't find. Thank you very very much!! I haven't tested this on all my current tables yet..

But just wanted to confirm from you. It works fine even for the ddl that displays with broken lines. Just tested that! Or is this a 'feature' for which I should raise an SR?

Thanks for the response, but.. I am presuming that each database has its own sequence for partition numbering. Now I have to write code for my destination database to remove unused partitions..

Why not? If the database has created the partitions, then they will have SYS names You seem to have CSS turned off. Please don't fill out this field.

It is currently on hold. DDL2 Web Site. Please provide the ad click URL, if possible:. Help Create Join Login. Operations Management.

IT Management. Project Management. Resources Blog Articles Deals. Menu Help Create Join Login. Add a Review.

Browse Code Get Updates. Get project updates, sponsored content from our select partners, and more.

Full Name. Phone Number. Job Title. Company Size Company Size: 1 - 25 26 - 99 - - 1, - 4, 5, - 9, 10, - 19, 20, or More.

ddl.to

5 Gedanken zu “Ddl.to

Hinterlasse eine Antwort

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *